Products » Machines and Trucks » RC4WD » NEU 1/14 OVERLAND 6X6 RTR RC TRUCK W/ UTILITY BED RC4WD

NEU 1/14 OVERLAND 6X6 RTR RC TRUCK W/ UTILITY BED RC4WD

Ref:RC4VVJD00038

By order
1312.00 €

Quantidade:

Descrição:

1/14 Overland 6x6 RTR RC Truck w/ Utility Bed Important Note: Due to the size and weight of this product, this product has to be shipped in its own container. It will be shipped only by Expedited Shipping Service (5-8 days), this requires an extra shipping surcharge of $170 to ship anywhere in the US and all international countries due to the size and weight. Specifications: Hard Plastic European Style Front Cab Full Metal 2 Speed Transmission (Planetary Gears) Transfer Case (Billet Aluminum) Scale Fuel Tank (Billet Aluminum) Super Scaled Leaf Spring Suspension Setup Scale Rims (Billet Aluminum) Remote Lockable Front and Rear Axles (Locking Differential) Full Metal Front and Rear Axle Housing Steel Scale Drive Shaft Realistic Front Cab Latch Molded Fuel Tank Rear Light Guards Scale Light Buckets (Fits 3-5mm LED) Recommended Payload: 10kg /22lbs Painted Body Scale Wheels and Tires Brushed Motor Length: 28.8in / 734mm Width: 9.05in / 230mm Height: 10.7in / 273mm Weight: 6.8kg / 14.9lbs Axle Gear Ratio: 2.6 : 1 Maximum Load: 10kg / 22lbs Load Total Mass: 17kg / 37lbs First Gear 1:64, Second Gear 1:16 (Transmission) Basic 4 Channel 2.4Ghz Radio This Product Is Professionally Pre-assembled Manufactured by JDCustoms What's Included: 1/14 Overland 6x6 RTR RC Truck w/ Utility Bed Required Parts: 5200mAh 11.1V 3S 25C LiPo Battery Pack with XT60 Plug (Battery Size: 5.59 x 1.77 x 1.57in / 142 x 45 x 40mm ) 6x AA Batteries for Radio (Z-S1718) Instruction Manuals: Click here to download. Notes: Must turn on the transmitter before starting the ESC. ESC Supports XT60 Connector The ESC does not have lipo cut off. While some components may come assembled, it may be in your best interests to check the products to ensure all hardwares are tight. In some cases you may want to apply threadlock to some of the hardwares that were already installed. Use good quality hex drivers to avoid stripping screw heads. Use thread lock when putting metal screws into metal parts. Use threadlock sparingly. Do not over tighten screws, otherwise, you may strip the thread. Do not use more than 3S battery. (11.1 volt(s)) This product is for experienced R/C users. Not recommended if you just started with R/C.

 

Recommended for you

By order

Control Switch

8.95€
By order

CITADEL SMALL LAYER BRUSH

6.60€
By order

1/10 Sumo L Clear Body 12.3

62.99€