What''s in the Box?
- (1) AX-4 2.4GHz 2-Channel Radio
(1) AE-6 Forward/Reverse ESC/Rx
(1) SCX24 88T Motor with Pinion
(1) AS-1 Micro Servo
(1) Dynamite® 7.4v 350mAh 2S LiPo Battery
(1) USB Charger
(4) AA Batteries
STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.
DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It''s mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.
The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.
DURABLE STEEL AXLES
Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.
SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
COILOVER SHOCK ABSORBERS
Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you''ve known and expect from Axial.
FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.
LED LIGHTS INCLUDED
Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We''ve also included extra suspension links for adjusting your wheelbase length.
KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.
The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.
HINGED BODY SYSTEM
The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just one body clip and swinging the body up.
FULL BALL BEARINGS
Just because the SCX24™ is smaller in size doesn''t mean the features need to follow suit. No bushings found here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.
AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.
Approximate Assembly Time:No assembly required
Ball Bearings:Full set
Batteries:Dynamite 7.4V 350mAh 30C LiPo
Body:Axial Jeep JL Hardtop
Brakes:Integral with ESC
Charger:USB LiPo Charger
Chassis:Stamped Steel Chassis Rails
Differential:Worm Gear 16T/4T
Ground Clearance:1.06" (27mm)
Motor Type:Brushed 180 size, 88 turn
Radio:Axial AX-4 2.4GHz 2-Channel
Servos:AS-1 Micro Steering Servo
Shock Type:Coil-Over, Plastic Body, .9 - 1.3" (24 - 33.4mm)
Speed Control:AE-6 ESC/RX with Reverse
Suspension:3 Link Front and 4 Link Rear
Tire Diameter:2.0" (51mm)
Tire Tread:Nitto Trail Grappler M/T
Track:Front and Rear, 3.9" (99.5mm) distance from outer edges of tires measured side-to-side
Vehicle Type:Desert Crawler
Wheel Diameter:1.0" (26mm)
Wheel Type:Plastic KMC Machete, black in color
Wheel Width:.48" (12.4mm)